Ebara FSPA (End Suction Pump)

Standard Pump

EBARA FSPA – End Suction Pump

The EBARA FSPA is an end suction pump designed for firefighting and clean water distribution applications. It is equipped with a Back Pull Out system for easy maintenance.

Key Features:

Easy maintenance and disassembly, the BPO (Back Pull Out) system allows all rotating elements to be removed without disconnecting the suction and discharge pipes.
The discharge is located at the top center, with a mounting bracket beneath the casing to minimize misalignment and distortion caused by pipe loads.
Flow capacity: 250 to 750 USGPM
Working pressure: up to 250 psi with ANSI 250 lb flanges.

Download E-Brochure

Technical Specifications of the Pump

Liquid Handled: Clean water |
Temperature Range: 0 – 80°C (32 – 176°F) |
Max. Working Pressure: 250 psi |
Pump Speed: ±2900 rpm

Construction

Material

Casing: Ductile cast iron (FCD450) – FSPA / Cast iron (FC250) – CNPA |
Impeller: Bronze casting (CAC406) |
Shaft: Stainless Steel (SUS316) |
Shaft Sleeve: Bronze Casting (CAC406) |
Gland Packing: PTFE (Teflon) Impregnated

Standard Accessories

Pressure Gauge: 0 – 220 psi |
Compound Gauge: -30 in Hg – 60 psi |
Air Relief Valve: Available (Standard)

1. Non Overload design to ensure stable performance for all applications
2. Corrosion resistant materials used on the rotating parts
3. Hydraulically balanced impeller extends bearing life and assures smoother operation
4. Fully compliance to NFPA‐20 and certified by Underwriters Laboratories (UL)

Ebara FSPA (End Suction Pump)

Related Products

Discuss Your Technical Solution